![]()
height=384
src="http://www.12x0.de/project/data//master01.jpg"
width=512 border=0>
|
lang=EN-GB>The turntable arrived
in a horrible condition. The engine is missing, the tone arm has been
brutally ripped off and the on/off switch is broken too.
lang=EN-GB>A real pity but at least unexpensive ;
lang=EN-GB>) |
style="FONT-FAMILY: Arial; ">The turntable plattern in its former condition:
the painting was scratched off on wide areas and looked ridiculos
anyway.
style="FONT-FAMILY: Arial; ">There had to be something done!. |
![]()
height=384
src="http://www.12x0.de/project/data//master02.jpg"
width=512 border=0>
|
![]()
height=384
src="http://www.12x0.de/project/data//master03.jpg"
width=512 border=0>
|
style="FONT-FAMILY: Arial; ">Removing the old paint with a wire brush and
an electric drill. |
style="FONT-FAMILY: Arial; ">This looks way better now ;) |
![]()
height=384
src="http://www.12x0.de/project/data//master04.jpg"
width=512 border=0>
|
![]()
height=384
src="http://www.12x0.de/project/data//master05.jpg"
width=512 border=0>
|
style="FONT-FAMILY: Arial; ">Meanwhile i got the the engine unit to work
perfectly. I also removed the broken tone arm to have space for a
new one, I expected to arrive soon. |
style="FONT-FAMILY: Arial; ">A cleaned and repaired tone arm base. |
![]()
height=384
src="http://www.12x0.de/project/data//master06.jpg"
width=512 border=0>
|
![]()
height=384
src="http://www.12x0.de/project/data//master07.jpg"
width=512 border=0>
|
style="FONT-FAMILY: Arial; ">The small hole has been drilled to mount a
reverse function switch. It was noobishly added to the turntable.
This "extra feature" caused malfunction of the device while in a club
perfomance! :) |
style="FONT-FAMILY: Arial; ">Everything is ready to give the plattern a
new glance! |
![]()
height=384
src="http://www.12x0.de/project/data//master08.jpg"
width=512 border=0>
|
![]()
height=384
src="http://www.12x0.de/project/data//master09.jpg"
width=512 border=0>
|
style="FONT-FAMILY: Arial; ">Uhhhhm... Ugly! |
style="FONT-FAMILY: Arial; ">Adding new color |
![]()
height=384
src="http://www.12x0.de/project/data//master10.jpg"
width=512 border=0>
|
![]()
height=384
src="http://www.12x0.de/project/data//master11.jpg"
width=512 border=0>
|
style="FONT-FAMILY: Arial; ">While the paint is drying the new task is to
"remove" the hole |
style="FONT-FAMILY: Arial; ">Mixing up the putty mass... |
![]()
height=384
src="http://www.12x0.de/project/data//master12.jpg"
width=512 border=0>
|
![]()
height=384
src="http://www.12x0.de/project/data//master13.jpg"
width=512 border=0>
|
style="FONT-FAMILY: Arial; ">fill up and close the hole.... |
style="FONT-FAMILY: Arial">abrase ... |
![]()
height=384
src="http://www.12x0.de/project/data//master14.jpg"
width=512 border=0>
|
![]()
height=384
src="http://www.12x0.de/project/data//master15.jpg"
width=512 border=0>
|
style="FONT-FAMILY: Arial; ">polish... |
lang=EN-GB>Finished! This looks
quite better.
lang=EN-GB>You can see the white painted plattern already which had to dry
properly before i could proceed working on it. |
![]()
height=384
src="http://www.12x0.de/project/data//master16.jpg"
width=512 border=0>
|
![]()
height=384
src="http://www.12x0.de/project/data//master17.jpg"
width=512 border=0>
|
lang=EN-GB>Started working!
lang=EN-GB>Wet sanding off....kinda disgusting work! |
style="FONT-FAMILY: Arial; ">Succeeding in renewing the plattern's look! |
![]()
height=384
src="http://www.12x0.de/project/data//master18.jpg"
width=512 border=0>
|
![]()
height=384
src="http://www.12x0.de/project/data//master19.jpg"
width=512 border=0>
|
style="FONT-FAMILY: Arial; ">Wolla! A "disguting car wreck became a mercedes
benz!" (Xzibit) |
style="FONT-FAMILY: Arial; ">This is already something! :) |
![]()
height=384
src="http://www.12x0.de/project/data//master20.jpg"
width=512 border=0>
|
![]()
height=384
src="http://www.12x0.de/project/data//master21.jpg"
width=512 border=0>
|
style="FONT-FAMILY: Arial; ">Catch a last look at the ripped off tone arm
unit! |
style="FONT-FAMILY: Arial; ">The new on/off switch has arrived! |
![]()
height=389
src="http://www.12x0.de/project/data//master22.jpg"
width=518 border=0>
|
![]()
height=389
src="http://www.12x0.de/project/data//master23.jpg"
width=518 border=0>
|
style="FONT-FAMILY: Arial; ">The 33/45rpm knobs have already been equipped
with the new LEDs. |
style="FONT-FAMILY: Arial; ">Yeah dude, that's the way it gotta look! |
![]()
height=389
src="http://www.12x0.de/project/data//master24.jpg"
width=518 border=0>
|
![]()
height=389
src="http://www.12x0.de/project/data//master25.jpg"
width=518 border=0>
|
style="FONT-FAMILY: Arial; ">You may slightly guess what's it gonna be at
the end ;) |
style="FONT-FAMILY: Arial">At night... |
![]()
height=389
src="http://www.12x0.de/project/data//master26.jpg"
width=518 border=0>
|
![]()
height=389
src="http://www.12x0.de/project/data//master27.jpg"
width=518 border=0>
|
style="FONT-FAMILY: Arial; ">still at night baby... |
lang=EN-GB>Next task: the magic
sub-plattern illumination!
lang=EN-GB>Drawing marks professionaly with an edding, a ruler and the remaining
pieces of a geometry triangle :o) - however - it worked great! |
![]()
height=389
src="http://www.12x0.de/project/data//master28.jpg"
width=518 border=0>
|
![]()
height=389
src="http://www.12x0.de/project/data//master29.jpg"
width=518 border=0>
|
style="FONT-FAMILY: Arial; ">Setting the LED's |
style="FONT-FAMILY: Arial; ">Ready for wiring |
![]()
height=389
src="http://www.12x0.de/project/data//master30.jpg"
width=518 border=0>
|
![]()
height=389
src="http://www.12x0.de/project/data//master31.jpg"
width=518 border=0>
|
style="FONT-FAMILY: Arial; ">Wired |
style="FONT-FAMILY: Arial; ">Somehow the effect was'nt as fresh as expected.
style="FONT-FAMILY: Arial; ">So it had to be enhanced later |
![]()
height=389
src="http://www.12x0.de/project/data//master32.jpg"
width=518 border=0>
|
![]()
height=389
src="http://www.12x0.de/project/data//master33.jpg"
width=518 border=0>
|
... |
style="FONT-FAMILY: Arial; ">And God said: "Let there be light!"
style="FONT-FAMILY: Arial; ">And there was light! |
![]()
height=389
src="http://www.12x0.de/project/data//master34.jpg"
width=518 border=0>
|
![]()
height=389
src="http://www.12x0.de/project/data//master35.jpg"
width=518 border=0>
|
... |
... |
![]()
height=389
src="http://www.12x0.de/project/data//master36.jpg"
width=518 border=0>
|
![]()
height=389
src="http://www.12x0.de/project/data//master37.jpg"
width=518 border=0>
|
...looki
looki.... |
... |
![]()
height=389
src="http://www.12x0.de/project/data//master38.jpg"
width=518 border=0>
|
![]()
height=389
src="http://www.12x0.de/project/data//master39.jpg"
width=518 border=0>
|
style="FONT-FAMILY: Arial; ">This is a new important device, i bought for
a good price (48 euros) at eBay. It's a complete 1210 chassis,
including full functionally electronics. |
style="FONT-FAMILY: Arial; ">In order to improve the look of the sub-plattern
illumination i made it completely new. This time i placed 36(!) instead
of 16 LEDs under the turntable plattern. Dude, this is gonna rock
:) |
![]()
height=389
src="http://www.12x0.de/project/data//master40.jpg"
width=518 border=0>
|
![]()
height=389
src="http://www.12x0.de/project/data//master41.jpg"
width=518 border=0>
|
style="FONT-FAMILY: Arial; ">Unfortunately the transformer of the new technics
series could'nt get along with so many LEDs. Though all LEDs
"only" need 2.4 Watts it is 2.4 Watts too much for the transformer.
The LEDs began flickering as the TT started, To solve the problem,
i replaced the newer trafo with the trafo of a 1.st series technics. |
style="FONT-FAMILY: Arial; ">Transformer of the newer technics model. |
![]()
height=389
src="http://www.12x0.de/project/data//master42.jpg"
width=518 border=0>
|
![]()
height=389
src="http://www.12x0.de/project/data//master43.jpg"
width=518 border=0>
|
style="FONT-FAMILY: Arial; ">It works! And looks way better than before! |
style="FONT-FAMILY: Arial">Yeah! :) |
![]()
height=389
src="http://www.12x0.de/project/data//master44.jpg"
width=518 border=0>
|
![]()
height=389
src="http://www.12x0.de/project/data//master45.jpg"
width=518 border=0>
|
style="FONT-FAMILY: Arial; ">Engraved by an engravor :) |
style="FONT-FAMILY: Arial; ">My little boy got to have a name when he's
finished ;) |
![]()
height=389
src="http://www.12x0.de/project/data//master46.jpg"
width=518 border=0>
|
![]()
height=389
src="http://www.12x0.de/project/data//master47.jpg"
width=518 border=0>
|
style="FONT-FAMILY: Arial; ">Taking the cutting wheel and here we go... |
style="FONT-FAMILY: Arial; ">What a poor turntable :(... |
![]()
height=389
src="http://www.12x0.de/project/data//master48.jpg"
width=518 border=0>
|
![]()
height=389
src="http://www.12x0.de/project/data//master49.jpg"
width=518 border=0>
|
style="FONT-FAMILY: Arial; ">Roughly cut out |
style="FONT-FAMILY: Arial; ">Conditioning the egdes |
![]()
height=389
src="http://www.12x0.de/project/data//master50.jpg"
width=518 border=0>
|
![]()
height=389
src="http://www.12x0.de/project/data//master51.jpg"
width=518 border=0>
|
style="FONT-FAMILY: Arial; ">Looks quite good, does'nt it? |
style="FONT-FAMILY: Arial; ">The two "patients" |
![]()
height=389
src="http://www.12x0.de/project/data//master52.jpg"
width=518 border=0>
|
![]()
src="http://www.12x0.de/project/data//master53.jpg"
width=518 border=0>
|
style="FONT-FAMILY: Arial; ">The new tone arms finally arrived! |
style="FONT-FAMILY: Arial; ">Yet the tone arm has'nt been fixed on its base. |
![]()
src="http://www.12x0.de/project/data//master54.jpg"
width=518 border=0>
|
![]()
src="http://www.12x0.de/project/data//master55.jpg"
width=518 border=0>
|
style="FONT-FAMILY: Arial; ">Resoldered the cables and contacts. The previous
soldering contacs were not of enough quality. |
style="FONT-FAMILY: Arial; ">Mounted tone arm and plus the perfect wiring. |
![]()
src="http://www.12x0.de/project/data//master56.jpg"
width=518 border=0>
|
![]()
src="http://www.12x0.de/project/data//master57.jpg"
width=518 border=0>
|
style="FONT-FAMILY: Arial; ">Finished, but i expect the missing tone arm
stand to arrive soon... |
style="FONT-FAMILY: Arial; ">Slowly it becomes a turntable again! :) |
![]()
src="http://www.12x0.de/project/data//master58.jpg"
width=518 border=0>
style="FONT-FAMILY: Arial">Update: 18.02.05 |
![]()
height=389
src="http://www.12x0.de/project/data//master59.jpg"
width=518 border=0>
|
style="FONT-FAMILY: Arial; ">This chassis has been recently painted at a
paint shop for cars. |
style="FONT-FAMILY: Arial">... |
![]()
height=389
src="http://www.12x0.de/project/data//master60.jpg"
width=518 border=0>
|
![]()
height=389
src="http://www.12x0.de/project/data//master61.jpg"
width=518 border=0>
|
style="FONT-FAMILY: Arial; ">.... |
style="FONT-FAMILY: Arial; ">Old vs. New |
![]()
height=389
src="http://www.12x0.de/project/data//master62.jpg"
width=518 border=0>
|
![]()
height=389
src="http://www.12x0.de/project/data//master63.jpg"
width=518 border=0>
|
style="FONT-FAMILY: Arial; ">Complete electronics including the tone arm. |
style="FONT-FAMILY: Arial; ">The first parts are being installed... |
![]()
height=389
src="http://www.12x0.de/project/data//master64.jpg"
width=518 border=0>
|
![]()
height=389
src="http://www.12x0.de/project/data//master65.jpg"
width=518 border=0>
|
style="FONT-FAMILY: Arial; ">It's working ... HOORRAAAAYY !! :D |
style="FONT-FAMILY: Arial; ">The illuminated sign is still missing... |
![]()
height=389
src="http://www.12x0.de/project/data//master66.jpg"
width=518 border=0>
|
![]()
height=389
src="http://www.12x0.de/project/data//master67.jpg"
width=518 border=0>
|
.... |
style="FONT-FAMILY: Arial">fitting in... |
![]()
height=389
src="http://www.12x0.de/project/data//master68.jpg"
width=518 border=0>
|
![]()
height=389
src="http://www.12x0.de/project/data//master69.jpg"
width=518 border=0>
|
style="FONT-FAMILY: Arial; ">Installing the illumination... |
style="FONT-FAMILY: Arial">...wiring |
![]()
height=389
src="http://www.12x0.de/project/data//master70.jpg"
width=518 border=0>
|
![]()
height=389
src="http://www.12x0.de/project/data//master71.jpg"
width=518 border=0>
|
style="FONT-FAMILY: Arial; ">*click* |
style="FONT-FAMILY: Arial; ">comparing with the LEDs switched off... |
![]()
height=389
src="http://www.12x0.de/project/data//master72.jpg"
width=518 border=0>
|
![]()
height=389
src="http://www.12x0.de/project/data//master73.jpg"
width=518 border=0>
|
style="FONT-FAMILY: Arial; ">We get closer to the end... |
style="FONT-FAMILY: Arial; ">The chassis without the insides |
![]()
height=389
src="http://www.12x0.de/project/data//master74.jpg"
width=518 border=0>
|
![]()
height=389
src="http://www.12x0.de/project/data//master75.jpg"
width=518 border=0>
|
style="FONT-FAMILY: Arial; ">had to be modified because the sign stuff did'nt
fit into it. |
style="FONT-FAMILY: Arial; ">Cutting off a bit... |
![]()
height=389
src="http://www.12x0.de/project/data//master76.jpg"
width=518 border=0>
|
![]()
height=389
src="http://www.12x0.de/project/data//master77.jpg"
width=518 border=0>
|
Fits! |
style="FONT-FAMILY: Arial">chic ;) |
![]()
height=389
src="http://www.12x0.de/project/data//master79.jpg"
width=518 border=0>
|
![]()
src="http://www.12x0.de/project/data//master80.jpg"
width=518 border=0>
style="FONT-FAMILY: Arial; ">Update: 30.03.05: |
style="FONT-FAMILY: Arial; ">Better pictures coming soon! |
lang=EN-GB>A few impressions.
It's not finished yet because
lang=EN-GB>the following has to be done:
lang=EN-GB>- ON/OFF knob has scratches, so its gonna be replaced
lang=EN-GB>- tone arm will be replaced with a golden one and the base might
get painted in the color of the plattern.
lang=EN-GB>- cinch cables will be replaced with some highend Sommer Onyx
2025 cables, The old ones were in too bad condition.
lang=EN-GB>Not worthy a pimp turntable! |
![]()
src="http://www.12x0.de/project/data//master81.jpg"
width=518 border=0>
|
![]()
src="http://www.12x0.de/project/data//master82.jpg"
width=518 border=0>
|
... |
... |
![]()
src="http://www.12x0.de/project/data//master83.jpg"
width=518 border=0>
|
![]()
src="http://www.12x0.de/project/data//master84.jpg"
width=518 border=0>
|
... |
... |
![]()
src="http://www.12x0.de/project/data//master85.jpg"
width=518 border=0>
|
![]()
src="http://www.12x0.de/project/data//master86.jpg"
width=518 border=0>
|
... |
... |
![]()
src="http://www.12x0.de/project/data//master87.jpg"
width=518 border=0>
|
|
|
style="FONT-FAMILY: Arial; ">to be continued ... :) www.kaype.net |
|
