Ahh... the PVC has better angle selections than the pipe fittings I used. My pipe fitting brackets are so sturdy you'd pull the desk over before moving the CDJ.
quote:
Originally posted by Orbital32
Actually those are my custom made stands.
oh yeah before i started out with the turntables I used to rock Vitural DJ and Traktor studio. Now i just use it to record the to the computer. Actually it works pretty good going through the mixer as well.
Aug-18-2007 12:49
Neo Hacker
Passionate
Registered: Dec 2004
Location: Montréal
quote:
Originally posted by Orbital32
Actually those are my custom made stands.
just got my EFX1000, picture of my setup updated, soon
Aug-18-2007 15:02
blitzz
Supreme tranceaddict
Registered: Feb 2007
Location: Bay of the GODS
quote:
Originally posted by Ryan0751
Updated setup once again...
Since the Xone 3D didn't workout for me (and I had foolishly already sold my Xone 92 rotary, which I loved)... I decided to go with a classic style rotary, the Rane MP2016a and XP2016a.
This resulted in a major construction project (since the mixer can only be rack mounted, connectors are on the bottom).
I built the 19" rack (bought the 8U rack rails at guitar center), and cut a 15"x19" hole in the desk underneath it. I also built the CDJ stands and the stand for the Trigger Finger (for use with Torq) out of pipe fittings and plywood.
Lighting was done with 2 Chauvet LED color splash JR's under the desk, and two LED light strips on the bottom of the CDJ stands (for lighting the mixer area).
Is this the same one on Dj forums??? saw this pic on the dj set up thread.
___________________
Aug-19-2007 08:59
Ryan0751
Supreme tranceaddict
Registered: May 2005
Location: Boston, MA
OMG someone copied me!
Yeah it's the same setup
quote:
Originally posted by blitzz
Is this the same one on Dj forums??? saw this pic on the dj set up thread.
Aug-19-2007 15:18
Neo Hacker
Passionate
Registered: Dec 2004
Location: Montréal
Alright, new pictures as promised ! Added the EFX1000
Setup :
2x CDJ800MK2
1x Xone92 Linear
1x HDJ100 headphones
1x EFX1000
1x Odyssey L-Stand bracket for the EFX
Roadready roadcases (for mixer, cdjs). UDG bag for EFX coming soon.
Sefour X10 to hold everything
Last edited by Neo Hacker on Aug-21-2007 at 21:33
Aug-21-2007 21:19
DiscoStew
Nees more cowbell
Registered: Mar 2007
Location: Dirty South
Pretty sweet. Where are the speakers?
___________________
Temporarily retired from the world of DJing.
Aug-21-2007 21:23
Neo Hacker
Passionate
Registered: Dec 2004
Location: Montréal
quote:
Originally posted by DJChrisB
Pretty sweet. Where are the speakers?
lol I knew someone would ask me that
Speakers are an old Panasonic AK300 setup near my computer (on the opposite side of the room). Speakers are ok, but I usually use my headphones (Pioneer HDJ1000) because I'm in an appartment. I might sell my Panasonic speakers for M-Audio or KRK but I have no room near my setup for that, so they would be near my computer at the same place of my Panasonic ones. I have no problems mixing with speakers on my back.
But first, before buying new gear, I need to pay the EFX
Aug-21-2007 21:31
Ryan0751
Supreme tranceaddict
Registered: May 2005
Location: Boston, MA
How is the EFX working out? I'm debating getting one, or just waiting to integrate ableton again (dunno if I'm going to bother after my Xone 3D experiment went so badly).
It's so big though! Almost the size of a CDJ
quote:
Originally posted by Neo Hacker
lol I knew someone would ask me that
Speakers are an old Panasonic AK300 setup near my computer (on the opposite side of the room). Speakers are ok, but I usually use my headphones (Pioneer HDJ1000) because I'm in an appartment. I might sell my Panasonic speakers for M-Audio or KRK but I have no room near my setup for that, so they would be near my computer at the same place of my Panasonic ones. I have no problems mixing with speakers on my back.
But first, before buying new gear, I need to pay the EFX
Aug-21-2007 22:00
Neo Hacker
Passionate
Registered: Dec 2004
Location: Montréal
quote:
Originally posted by Ryan0751
How is the EFX working out? I'm debating getting one, or just waiting to integrate ableton again (dunno if I'm going to bother after my Xone 3D experiment went so badly).
It's so big though! Almost the size of a CDJ
I love it. It has a lot of tricks you can learn (like a feedback loop or the 3 bands isolator kill). I'm still learning how this thing works
For those who might be interested to know how it is connected. The input of my EFX is plugged into AUX1 of my Xone and then the output to the Channel 4 of my Xone. This allow me to use the crossfader of the Xone as a wet/dry control. Much more useful than the standart AUX fader on the Xone in my opinion
Aug-21-2007 22:06
Ryan0751
Supreme tranceaddict
Registered: May 2005
Location: Boston, MA
Yep, that's the way to hook it up if you have the extra channel input!
It has it's own wet/dry control right? I just got the Rane, and the effect insert is only on the master...
quote:
Originally posted by Neo Hacker
I love it. It has a lot of tricks you can learn (like a feedback loop or the 3 bands isolator kill). I'm still learning how this thing works
For those who might be interested to know how it is connected. The input of my EFX is plugged into AUX1 of my Xone and then the output to the Channel 4 of my Xone. This allow me to use the crossfader of the Xone as a wet/dry control. Much more useful than the standart AUX fader on the Xone in my opinion
Aug-21-2007 22:22
Neo Hacker
Passionate
Registered: Dec 2004
Location: Montréal
quote:
Originally posted by Ryan0751
Yep, that's the way to hook it up if you have the extra channel input!
It has it's own wet/dry control right? I just got the Rane, and the effect insert is only on the master...
yep it does
Aug-21-2007 22:38
RJT
last minute disco
Registered: Oct 2004
Location:
Ryan, Jesus Tap-Dancing Christ is that the nicest setup I have ever seen.